Spring Balancers for Tools and Assembly Lines
A spring balancer hangs above the work station and holds a tool so it floats at working height. The operator pulls the tool down to use it and lets go, and the spring holds it up out of the way. Nut runners, screwdrivers, welding guns and grinders stop getting dropped, and the operator's wrists and shoulders take less strain over a shift.
Spring Balancers we supply
About spring balancers
Our spring balancers come in six ranges: 1–3 kg, 3–5 kg, 5–9 kg, 9–15 kg, 15–22 kg and 22–30 kg. Each can be adjusted within its range so the tool hangs balanced. They are common on automobile and component assembly lines in Bengaluru, Hosur and Chennai, and in fabrication, electronics and packing units.
Weigh the tool with its hose or cable and choose the range that puts that weight near the middle. If it falls right at the top of one range, take the next one up. Send the weight on WhatsApp for today's price.
Buying tips
- Weigh the tool together with its hose, cable and any fixture before choosing a range.
- Pick a range where the total weight sits near the middle, not at the very top.
- Fit a separate safety chain or wire rope from the tool to the structure as a backup.
- Hang the balancer from a rail or trolley if the operator moves along the line.
Want to know the price? Just ask.
Steel prices change every week, so we share today's price directly. Tell us the product and size and we'll reply on WhatsApp with the price, GST and delivery to your city.
- One piece or a hundred: same quick reply
- Delivery cost included in the quote
- Reply within [REPLY TIME] on working days
Spring Balancers: common questions
How do I choose the right spring balancer?
Weigh the tool with its hose or cable, then choose the range that covers that weight. For a 7 kg nut runner, the 5–9 kg balancer is the right fit.
Can the tension be adjusted?
Yes. Each spring balancer has a tension adjustment so you can set the tool to hang balanced within its range.
Can a spring balancer be used for lifting?
No. It is made to support and balance tools at working height. Use a hoist for lifting loads.
What ranges do you sell?
1–3 kg, 3–5 kg, 5–9 kg, 9–15 kg, 15–22 kg and 22–30 kg.
Other categories
All products →
Manual Hoists
10 modelsChain pulley blocks, ratchet lever hoists and stainless steel chain blocks from 1 to 10 ton.
1 – 10 ton
Electric Hoists
11 modelsElectric chain hoists from 500 kg to 10 ton, mini wire rope hoists from 300 to 1200 kg and electric winches up to 80 m lift.
300 kg – 10 ton
Clutch Hoists & Stands
7 models1 ton clutch hoists and material hoists with 8 mm rope and 40 m lift, plus stands and rope guides.
1 ton, 40 m lift
Beam Trolleys
11 modelsGeared, push pull and electric beam trolleys from 500 kg to 10 ton for running a hoist along an I-beam.
500 kg – 10 ton