Cable Puller, 1 to 4 Ton
Hand-operated cable pullers in 1, 2, 3 and 4 ton for pulling cables, tensioning stays and dragging machines into place.
- Capacities: 1, 2, 3 and 4 ton
- Hand operated, no power needed
- Ratchet holds the load between strokes
- Steel wire rope with hooks
Cable Puller: models & specifications
Prices on request, GST extraAbout the cable puller
A cable puller is a hand-operated ratchet puller with a steel wire rope. Hook one end to a strong anchor and the other to the load, then work the handle. Each stroke draws the rope in, and the ratchet holds what you have gained between strokes. Release the ratchet to let the rope back out.
Electricians use cable pullers to pull and tension cables. Fabricators and riggers use them to straighten sections, pull frames square, tighten stays and drag machines into position. Farmers and transporters keep one for fencing, pulling out stuck vehicles and securing loads on trucks.
We sell cable pullers in 1, 2, 3 and 4 ton. They are light enough to carry to site and need no power, which makes them useful on remote jobs and anywhere a vehicle winch cannot reach.
A rope under tension can whip back if it slips or breaks, so stand to the side and keep others out of line with it. For overhead lifting, use a chain pulley block or lever hoist instead. Send the job details on WhatsApp for today's price.
Features
- Capacities: 1, 2, 3 and 4 ton
- Hand operated, no power needed
- Ratchet holds the load between strokes
- Steel wire rope with hooks
- Portable for site work
Where it's used
- Pulling and tensioning electrical cables
- Straightening and squaring fabricated frames
- Tightening stays and guy wires
- Dragging machines into position
- Vehicle recovery
- Fencing work
How to choose
- Choose a capacity above the pulling force needed, allowing extra for friction and stuck loads.
- Anchor to a point stronger than the puller's rating.
- Keep the rope straight and never let anyone stand in line with a rope under tension.
- Do not extend the handle for more force; if it is too hard to pull, use a bigger puller.
Want to know the price? Just ask.
Steel prices change every week, so we share today's price directly. Tell us the product and size and we'll reply on WhatsApp with the price, GST and delivery to your city.
- One piece or a hundred: same quick reply
- Delivery cost included in the quote
- Reply within [REPLY TIME] on working days
Cable Puller: common questions
Can I use a cable puller to lift a load?
Use a chain pulley block or lever hoist for overhead lifting. Cable pullers are for pulling and tensioning.
What capacities do you sell?
1, 2, 3 and 4 ton.
Does it need power?
No. It is fully hand operated.
Why should I stay out of line with the rope?
A rope under tension can whip back if it breaks or slips. Stand to the side, never in line with it.
Delivered across South India & Goa
Shipped by road from our NR Road store in Bengaluru.
Related products
Skid Roller
4 modelsSkid rollers in 6, 8, 12 and 15 ton for moving heavy machines, transformers and DG sets across a factory floor.
6 ton – 15 ton
Ratchet Lever Hoist
3 modelsCompact lever-operated hoists in 1.5, 3 and 6 ton with 3 m lift, for lifting, pulling and tensioning in tight spaces.
1.5 ton – 6 ton
Chain Pulley Block
5 modelsHand-operated chain pulley blocks in 1, 2, 3, 5 and 10 ton with 3 m standard lift. Longer chain can be fitted to suit your height.
1 ton – 10 ton